Consciouscarma
  • Home
  • About Us
  • Products
  • Community
    • Campaigns
    • Inspiration
    • Initiatives
    • CSR
  • Features
    • Sustainable Startup Stories
    • Travel
    • Lifestyle
    • Partners
  • Economy
    • Industry
    • Innovations
    • National
    • Global
  • Environment
  • Expert Corner
    • Authored Articles
    • Reports
  • Magazine
  • Contact
Category:

Press Releases

Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Press Releases

India’s Growing Low Carbon Aluminium Recycling Industry Demands Zero per cent Import Duty on Scrap Metal – Material Recycling Association of India (MRAI)

by November 10, 2023
written by

Indian aluminium demand is growing rapidly due to increase in population, urbanisation and industrialisation. It is an important metal for high-value demand segments like infrastructure – Power, Transportation, Railways, Aerospace, Building & Construction, Renewable Energy and Consumer Durables to remain net zero economy by 2050.

India’s growing appetite for aluminium industry is largely accounted by demand for aluminium recycling industry in India which is zoomed at a CAGR of 9-11% from fiscal 2015 and 2023, while primary aluminium demand registered a CAGR of 1-2% only. India’s automobile, power, railways, packaging, consumer durables and construction sectors are the key demand drivers for recycling aluminium industry.

Looking to environment concerns, domestic primary aluminium manufacturers have the highest carbon intensity among global producers, with emissions of 14 tonnes of CO2 equivalent per tonne of aluminium. Whereas, recycled aluminium industry emits only 0.3MT CO2 per ton of recycled aluminium products.

India’s lower carbon-intensive aluminium recycled products demand is increasing day by day with newer applications with the growing appetite for environmentally friendly products due to its higher usage of scrap is another lever for decarbonisation.

While recycling aluminium industry is facing major challenges of domestic scrap collection due to lowest per capital consumption in India in past. As Aluminium has a long life cycle, there is always a long gap between a recycled product entering into services and its end of life. Given, India’s fast paced growth, under the leadership of Prime Minister Modi Ji, India is consuming much more materials than is available from End-of-Life products. Hence, the recycling industry relies on imports of Metal Scrap to meet the shortfall to ensure sustainable business.

Mr. Sanjay Mehta, President, MRAI

“We strongly urge the Government must provide a level playing field for both primary and secondary sector as we believe both are vital contributors to the national economy, for example, if customs duties are applicable on import of scrap, then commensurate export duties on the basis of total cost to country on primary products should also be levied. Further, the Standards on Scrap material should be formed after consultation with recycling aluminum industry and to support recycling it should be industry friendly and not restrictive in nature, else it will have a negative impact on the aluminum recycling industry which is supporting to minimize the carbon emission,” as Mr. Sanjay Mehta, President, MRAI urged the government.

“Overall, we request government policy makers should make zero per cent duty on metal scrap till India becomes the Atmanirbhar on the availability of sufficient quantity and quality of scrap,” added by Mr. Mehta.

While highlighting the benefits of Secondary Aluminium Industry, Mr. Mohan Agarwal, MD, CMR Green Technologies Ltd., mentioned that, the usage of Recycled aluminium, due to its monumental benefits of being environment friendly, being high quality, generating large employment and being cheaper is growing a very faster pace. While recycling does not generate any liquid or solid effluents and has CO2 imprint of only 0.3 mt per ton, every 1 mt of primary aluminium generates 14 mt of Co2 emission and 8 mt of hazardous land fill. Therefore, as a services to the future generations, we must promote recycled aluminium over primary aluminium as added further by Agarwal.

Highlighting the role of recycling in the Indian Economy, Mr. Dhawal Shah, Partner, Metco Ventures LLP emphasized that, “India’s secondary aluminium metal manufacturing sector is playing a larger role in the circular economy, sustainability and low-carbon economy to minimise the CO2 emission. Despite this, Primary aluminium producers often suggesting to impose higher import duty on aluminium scrap and also demanding scrap unfriendly BIS specifications, insufficient collection systems which can hinder the market growth,” added further by Mr. Shah.

However, many countries like EU, UAE & South Africa have recognised that scrap is a critical raw material and have legislated to prevent its exports making it virtually impossible for us to import scrap. This is going to become more challenging ever after the execution of EU Waste Management Rule which will be effective from 1st Jan 2025 for the non-OECD countries.

More importantly, India needs to have strategy for enhancing scrap imports as the world is shutting exports and domestic sourcing is limited. Though, the present policy regime is highly skewed in favour of primary producers and every day new barriers to recycling aluminium business are being erected by the primary sector – such as aggressively advocating tariff and non-tariff barriers on secondary producers, introducing unreasonable and un-implementable standards for raw materials etc.

November 10, 2023 0 comment
0 FacebookTwitterPinterestEmail
Newer Posts
Older Posts

Recent Posts

  • India–UK Free Trade Agreement Opens Global Growth Opportunities for 3R ZeroWaste’s Circular Economy Solutions
  • Plastic Free July: Why True Sustainability Goes Beyond Swapping Plastic
  • From the Editor’s Desk: When Greed Takes Over Conscience
  • Beyond the Pose: Why Your Yoga Mat Needs a Sustainable Upgrade
  • Best Sustainable Father’s Day Gifts: Conscious Carma’s Exclusive Picks

Recent Comments

  • Team Conscious Carma on Label Shivika Agarwal – where craft meets sustainability
  • Cocomeister.jp on Label Shivika Agarwal – where craft meets sustainability
  • Team Conscious Carma on Equitable City Designs To Fight Climate Change
  • UN report calls for repurposing of USD 470 billion of agricultural support that distorts prices and steer us away from environment and social goals | Consciouscarma on UNEP & ICMR collaborate to boost understanding of environmental dimensions of antimicrobial resistance in India
  • Wild Earth : Natural body products | Consciouscarma on Sat.Suma : the true essence of flowers in your everyday skincare needs

Keep in touch

Facebook Twitter Instagram Youtube

Recent Posts

  • India–UK Free Trade Agreement Opens Global Growth Opportunities for 3R ZeroWaste’s Circular Economy Solutions

  • Plastic Free July: Why True Sustainability Goes Beyond Swapping Plastic

  • From the Editor’s Desk: When Greed Takes Over Conscience

  • Beyond the Pose: Why Your Yoga Mat Needs a Sustainable Upgrade

  • Best Sustainable Father’s Day Gifts: Conscious Carma’s Exclusive Picks

  • How Sacred Sound is Reshaping the Future of Holistic Health?

Categories

  • Community (38)
    • Campaigns (3)
  • CSR (4)
  • Economy (82)
    • Global (24)
    • Industry (42)
    • Innovations (4)
    • National (2)
  • Environment (48)
  • Expert Corner (48)
    • Authored Articles (47)
  • Featured (5)
    • Partners (1)
  • Global News (2)
  • Initiatives (31)
    • CSR (3)
    • Events (6)
  • Inspiration (22)
  • Lifestyle (9)
  • Media Coverage (6)
  • Press Releases (4,358)
  • Products (126)
    • Accessories (27)
    • Apparel (32)
    • Beauty (26)
    • Food (4)
    • Gifting (3)
    • Home Décor (15)
    • Skin-Care (14)
  • Reports (3)
  • Spirituality (10)
  • Sustainability (49)
  • Sustainable Startup Stories (28)
  • Travel (19)
  • Uncategorized (2)
  • Wellness (33)
    • Home Cleaners (3)

Archives

  • August 2026 (1)
  • July 2026 (1)
  • June 2026 (6)
  • October 2024 (1)
  • September 2024 (1)
  • July 2024 (2)
  • June 2024 (2)
  • May 2024 (1)
  • November 2023 (330)
  • October 2023 (554)
  • September 2023 (631)
  • August 2023 (718)
  • July 2023 (723)
  • June 2023 (710)
  • May 2023 (608)
  • April 2023 (114)
  • March 2023 (7)
  • February 2023 (3)
  • January 2023 (11)
  • December 2022 (18)
  • November 2022 (1)
  • August 2022 (6)
  • July 2022 (8)
  • June 2022 (24)
  • May 2022 (11)
  • April 2022 (19)
  • March 2022 (11)
  • February 2022 (11)
  • January 2022 (14)
  • December 2021 (10)
  • November 2021 (4)
  • October 2021 (14)
  • September 2021 (22)
  • August 2021 (12)
  • July 2021 (17)
  • June 2021 (17)
  • May 2021 (16)
  • April 2021 (22)
  • March 2021 (33)
  • February 2021 (16)
  • January 2021 (22)
  • December 2020 (10)
  • Facebook
  • Twitter
  • Instagram
  • Pinterest
  • Linkedin
  • Youtube

@2020 - All Right Reserved. Designed and Developed by Bizopser Technologies

Consciouscarma
  • Home
  • About Us
  • Products
  • Community
    • Campaigns
    • Inspiration
    • Initiatives
    • CSR
  • Features
    • Sustainable Startup Stories
    • Travel
    • Lifestyle
    • Partners
  • Economy
    • Industry
    • Innovations
    • National
    • Global
  • Environment
  • Expert Corner
    • Authored Articles
    • Reports
  • Magazine
  • Contact